Product
Overview
PreTox
2000 Fast Dry
PreTox
7000 Stripper
PreTox
2000 DM
Product
Acceptance
Product
Development
Related
www sites |
PreTox 2000 Fast Dry
Data Sheet
Description
PreTox 2000FD is a single component, temporary overcoating
applied to a lead-based paint coated surface as part of surface preparation/lead abatement
operations. PreTox 2000FD renders lead based paint non-hazardous for disposal. Designed
with fast dry times and limited adhesion, PreTox 2000FD is easy to use on the job. PreTox
2000FD does not contribute additional dust during abrasive blasting or cause additional
wear and tear on equipment.
Recommended Uses
- Structural Steel
- Ships
- Storage Tanks
- Concrete
- Brick/Masonry
- Wood
- Heavy Equipment
- Pipelines
Compatible Removal Methods
- Dry Abrasives
- Wet Abrasives
- Sponge Abrasive
|
- Power Tools
- Recyclable Abrasives
- Water Jetting
|
Recommended Application Equipment
PreTox 2000FD can be applied by brush, roller or mechanical
spray equipment. Industrial grade airless spray equipment such as a Graco King or Bulldog
is recommended. When using such equipment, use a .045 tip or larger and remove all filters
or use 20 mesh or larger filter. |
|
Thinning/Clean Up
Thinning is not required or recommended. Clean up equipment
after use with any aliphatic or aromatic solvent.
Features
- Dry time <1 hour at 70ºF and 50% RH
- Spread rate: 2,000 to 5,000 sq.ft/hr depending on substrate
and equipment.
- Coverage 40 to 175 sq.ft/gal depending on paint and removal
method. Average coverage for steel structures is 80 sq.ft/gal.
- VOC = 2.7 lb./gal
- Flashpoint = 71º F
- Solids = 72% (by weight)
- Weight per gallon = 11.5lbs
Product Use
- Mix thoroughly (Some settling will occur during storage).
- Apply to substrate.
- Allow to dry (usually one hour or less).
- Remove along with underlying coating.
- Sample waste as per federal and local regulation (for
assistance, call NexTec at 800-338-8296).
- Dispose of debris.
For more detail instruction on the
use of PreTox 2000FD see
Safety Precautions
PreTox 2000FD contains flammable solvents. Ensure that
adequate ventilation and personal protective equipment compatible with solvent coatings is
used during application and curing.
|
| To
the best of our knowledge the technical data herein are true and accurate at the date of
issuance and are subject to change without prior notice. No guarantee of accuracy is given
or implied. Manufacturer warrants that the Products are free from defects in material and
workmanship under normal use and proper storage. Manufacturer’s obligation under this
warranty shall be limited to the replacement of any product that may be defective within
one year from the date of shipment to the original purchaser, and which
Manufacturer’s examination discloses to Manufacturer’s satisfaction to be
defective or at the Manufacturer’s option, to refund Distributor in an amount equal
to the purchase price paid by Distributor. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES EXPRESSED OR IMPLIED INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR USE, AND OF ALL OTHER OBLIGATIONS OR LIABILITIES ON MANUFACTURER’S PART, AND
MANUFACTURER NEITHER ASSUMES, NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR MANUFACTURER,
ANY OTHER LIABILITY IN CONNECTION WITH THE SALE OF THIS PRODUCT. THIS WARRANTY SHALL NOT
APPLY TO PRODUCTS OR ANY PART THEREOF WHICH HAS BEEN SUBJECT TO FREEZING, EXCESSIVE HEAT,
DILUTION, IMPROPER MIXING, IMPROPER STORAGE, OR IMPROPER APPLICATION |
4050 Westmark Drive. Dubuque, Iowa 52002 www.pretox.com
1-800-338-8296