 PreTox Systems, when used correctly, comply with all current
applicable federal, state, and local regulations.
See what the EPA has to say about PreTox System
To ensure that there were no regulatory barriers to the use of PreTox System, NexTec,
Inc. sought the approval of the EPA. While the EPA will not endorse specific products, it
will render an interpretation of applicable regulations.
Comments and Copy of Letter
from EPA
Waste Sampling Procedures
In order to insure accurate results form the TCLP test, correct sample procedures must be
followed.
Waste Sampling
Procedures
Safety Precautions when Applying
Product - Consult MSDS
PreTox 2000 Fast Dry
PreTox 2000FD contains flammable solvents. Ensure that
adequate ventilation and personal protective equipment compatible with solvent coatings
are used during application and curing.
PreTox 7000 Paint Stripper
Safety goggles and butyl rubber or neoprene gloves are recommended. Maintain adequate
ventilation in confined areas. If misting is expected use NIOSH approved organic vapor
chemical cartridge respirator.
PreTox 2000 Demolition
PreTox 2000 Demo contains combustible solvents. Ensure that adequate ventilation and
personal protective equipment compatible with solvent coatings is used during application
and curing.
PreTox 8000 Paint Stripper Blast Enhancer
Safety goggles and butyl rubber or neoprene gloves are recommended. Maintain adequate ventilation in confined areas. If misting is expected use NIOSH approved organic vapor chemical cartridge respirator.
PreTox Systems Material Safety Data Sheet (MSDS) is
available upon request. Please call 1-800-338-8296 or fill out literature request form.
|
4050 Westmark Drive. Dubuque, Iowa 52002 www.pretox.com
1-800-338-8296